NorthStar 961 Reference Manual page 273

Time zone
Display of time
Cross-track error
961/962 Operations and Reference Manual, Rev. A
If you're viewing and editing information on the
screen, and you press one of the five function keys to view other
data, your edit-in-progress is immediately cancelled so you can view
the data requested by your function keypress. To resume editing at
DISPLAY SETUP
the
re-enter the data that you lost when you pressed the function key.
To purposely cancel an edit-in-progress, however, you'd normally
press the
When shipped from the factory, the current time is expressed
as Greenwich Mean Time (GMT). To change the time zone:
1. Press the CURSOR PAD to highlight the TIME ZONE field,
then press the EDIT key.
2. Press the CURSOR PAD up or down or press the ARROW
keys to select the desired zone.
3. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
4. Press RETURN to go back to the SETUP MENU screen.
To change the display of time to either a 12- or 24-hour clock:
1. Press the CURSOR PAD to highlight the TIME FORMAT
field, then press the EDIT key.
2. Press the CURSOR PAD left or right or press the ARROW
keys to select either 12 HR or 24 HR.
3. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
4. Press RETURN to go back to the SETUP MENU screen.
You can adjust the cross-track display limits on the STEER
screen and the CHART screen's INFO BARS to suit your
scale
needs—whether you're navigating out in open waters or trying
to maneuver through a tight channel. Cross-track scale is the
total left-to-right distance limit on your screen. For example, a
cross-track scale setting of 1000 feet displays 500 feet on
either side of your track line.
Chapter 13 - Customizing Setup Functions
NOTE:
screen, you must return to that screen and
CANCEL
key.
DISPLAY SETUP
Page 13-3