NorthStar 961 Reference Manual page 308

Chapter 13 - Customizing Setup Functions
Page 13-38
Loading all BSB and ChartPack charts
To load all the charts from the source CD:
1. Insert the desired chart CD into the CD-ROM drive.
It takes about 10 seconds to recognize that a CD is in the
drive tray.
2. Press the STAR key until you reach the SETUP MENU
screen, then press the CHART INVENTORY key.
3. Press the LOAD/UPDATE CHARTS key.
4. From the CHARTS IN DATABASE screen, press the LOAD
CHARTS key.
5. At the SELECT CHART SOURCE screen, press the
CURSOR PAD to highlight the CD-ROM drive, then press
the LOAD CHARTS key.
The LOADING CHARTS dialog box appears.
If a chart you're loading is already in the database, you'll
have three options to choose from; if none of the charts is
already in the database, these options won't be shown.
>
To ensure that the chart database contains the chart(s)
with the most recent file date, press the NEWEST
VERSION key.
>
To always replace chart(s) already in the database, press
the ALWAYS OVERWRITE key.
>
To never replace chart(s) already in the database, press
the NEVER OVERWRITE key.
6. Press the desired key to start loading the charts (or press
CANCEL to return to the SELECT CHART SOURCE
screen).
After loading, the LOADING CHARTS dialog box provides
a summary of the total number of charts loaded.
7. Press CONFIRM to return to the CHARTS IN DATABASE
screen.
Loading marked BSB and ChartPack charts
To mark and load individual charts from the source CD:
961/962 Operations and Reference Manual, Rev. A