NorthStar 961 Reference Manual page 230

Chapter 10 - Waypoint and Route Navigation
Page 10-16
3. Press the GO NOW key.
A new unnamed waypoint is created at the cursor
location, the CHART screen appears, and you are guided
directly to this new, temporary waypoint. Press the TRIP
key to see the waypoint in the trip. Note that this point isn't
stored in the waypoint database, and that all unnamed
waypoints are labelled as COORD.
Adding a location on the chart to the end of the trip
1. Press the CURSOR PAD to move the cursor to the desired
location on the CHART screen (to establish a precise
position for this new waypoint, press the IN or OUT keys
to zoom the chart view in or out.
2. Press the CURSOR menu key.
The SELECTED CURSOR POSITION dialog box
appears. If desired, use the KEYPAD to change the
coordinates before moving to the next step.You can also
view the coordinates as either lat/lon or TDs by pressing
the TDS,LAT/LON key.
Selected cursor position dialog box
961/962 Operations and Reference Manual, Rev. A
)