NorthStar 961 Reference Manual page 353

Viewing GPS status
961/962 Operations and Reference Manual, Rev. A
1. At the RECEIVER INFORMATION screen, press the
CURSOR PAD to highlight the BEACON BAUD field, then
press the EDIT key.
2. Press the CURSOR PAD left or right to highlight 200, 100,
50, or 25 bps.
3. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
The GPS STATUS screen lets you see a display of all available
satellites, including their signal strength and your expected
accuracy, as well as the frequency, baud rate, and status of
DGPS transmitters (961XD/962XD only). To display this
information, press the STAR key until you reach the SERVICE
MENU screen, then press the GPS STATUS key.
To go back to an overview of GPS and DGPS, see "Introducing
GPS and DGPS" starting on page 2-11. For details about the
GPS satellite status screen, see "Understanding Position
Coordinates" starting on page 5-1.
Chapter 14 - Service and Maintenance Functions
GPS satellite status screen
Page 14-9