NorthStar 961 Reference Manual page 358

Chapter 14 - Service and Maintenance Functions
Page 14-14
>
To restore only your setup and service options (user
preferences), press the USER PREFERENCE key.
>
To restore only your waypoints and routes, press the
WAYPOINTS AND ROUTES key (waypoints and routes
are always restored together since routes are composed
of waypoints).
To restore all of the above, press the ALL key.
>
The RESTORE DATA dialog box appears, defined as
either user preference data, waypoint and route data, or
all data, depending on which of the above options you
chose.
3. Insert the disk into the drive (either a floppy disk or a zip
disk), then press the CONFIRM key.
The RESTORING DATA dialog box appears (defined as
either user preference data, waypoint and route data, or
all data), asking you to wait while data is restored. This
dialog box is followed by the SUMMARY OF DATA
RESTORED dialog box showing the number of files
restored.
4. Press the CONFIRM key to return to the DATABASE
FUNCTION screen. To use the restored database, you
961/962 Operations and Reference Manual, Rev. A
Select database to restore dialog box