NorthStar 961 Reference Manual page 318

Chapter 13 - Customizing Setup Functions
OBJECTIVE:
You subscribe to the
Navigator series, have
just received an Update
CD for your charts, and
want to update the charts
in the 961/962.
Page 13-48
Updating HCRF charts
Update CDs are cumulative, so if you haven't installed the
Update CD from a previous week, you can just skip to the
most current weekly Update CD to load the most current chart
information.
To update HCRF charts, you'll need:
the Update CD (contains the updates to the charts); and if
you've received a new floppy disk with your Update CD, be
sure to use this disk as well during the updating process.
1. Press the STAR key until you reach the SETUP MENU
screen, then press the CHART INVENTORY key.
2. At the CHART INVENTORY screen, press the LOAD/
UPDATE CHARTS key.
3. Insert the Update CD into the CD-ROM drive.
4. Press the UPDATE CHARTS key.
All HCRF charts are updated.
5. At the UPDATING CHARTS dialog box, press the
CONFIRM key.
The charts are updated and the HCRF SUMMARY dialog
box appears. Each chart updated is represented by a
different horizontal line, with updating details for the
highlighted line displayed at the bottom (press the
CURSOR PAD up or down to highlight each individual
chart). The far-left column displays either the word OK or
an error number, if any. If an error is displayed, write down
the error number and see "Table 12: HCRF chart errors"
on page 13-55.
961/962 Operations and Reference Manual, Rev. A