NorthStar 961 Reference Manual page 42

Chapter 1 - Quick Start
Page 1-28
2. To change these coordinates, use the KEYPAD to enter
new coordinates: Press the CURSOR PAD right to move
the flashing cursor to the longitude field or press down to
move to the distance and bearing fields, then use the
KEYPAD to enter new coordinates. (For details about
using the KEYPAD to enter data, see "Entering data"
starting on page 2-7.) To display the coordinates as lat/lon
or TDs, press the LL/TDS key.
961/962 Operations and Reference Manual, Rev. A
Go to coordinates dialog box