NorthStar 961 Reference Manual page 320

Chapter 13 - Customizing Setup Functions
OBJECTIVE:
You're out cruising and
have decided to go to an
area for which you have
the Chart CD and current
Update CD; however,
you don't have a chart
permit for that chart
(you're either a Navigator
or Skipper user). You've
contacted your ARCS
agent/distributor via
ship-to-shore radio and
obtained a permit for this
chart. Now you must
manually enter the chart
permit before loading the
chart onto the 961/962.
Page 13-50
Manually entering a chart permit
You can obtain a chart permit via ship-to-shore or email.
However, it's preferable to obtain your chart permits through
the usual method (Permit Disk), since chart permits are 35 to
42 characters that can be time-consuming to enter manually.
To manually enter a new chart permit (before loading a chart),
you'll need:
the Chart CD (contains the charts)
the Update CD (contains the updates to those charts)
the chart permit for the desired chart
1. Press the STAR key until you reach the SETUP MENU
screen, then press the CHART INVENTORY key.
2. At the CHART INVENTORY screen, press the LOAD/
UPDATE CHARTS key.
3. Insert the Update CD into the CD-ROM drive.
4. Press the LOAD CHARTS key.
5. At the SELECT CHART SOURCE screen, press the LIST
CHARTS key.
The CD is scanned for the charts and the CHARTS ON
DISK screen is displayed. Each chart for which you have
a permit is marked LOAD in the OPTION column.
961/962 Operations and Reference Manual, Rev. A