Chapter 4 - Understanding the Chart Screen
Using the cursor
Page 4-20
Routes" starting on page 8-1; for more about the trip function, see
"Using the Trip Function" starting on page 11-1.
By pressing the CURSOR menu key (after first pressing the
CURSOR PAD), you can perform the following tasks:
key
•
go directly to the cursor position
•
add the cursor position to the end of your trip
•
store the cursor position as a named waypoint
•
store the cursor position as a named avoidance point
•
store the cursor position as the first point of a new route
and display it
•
add the cursor position to the currently displayed route, if
any
Additional functions are available when you press the
CURSOR PAD—then select a route or future trip leg, a route or
trip point, or a single waypoint—then press the CURSOR key:
•
go to the selected route or future trip point and continue
(in a forward or reverse direction)
•
add the selected route to the end of your trip
•
join the selected route leg or current/future trip leg and
continue
•
edit the selected route or trip or the selected route or trip
point
•
edit the selected waypoint
•
delete the selected waypoint
All of the functions listed above are described in detail below.
961/962 Operations and Reference Manual, Rev. A