NorthStar 961 Reference Manual page 189

Creating a route
from existing
waypoints
961/962 Operations and Reference Manual, Rev. A
waypoints to this route at any time, go to the ROUTES screen,
select the route, and press the STOP SAVING ROUTE key.
If you use the default waypoint name, this type of new waypoint is
automatically
*SAVED02*
, and so on. The word
waypoint, and the number increases by one each time you save this
type of waypoint. The saved waypoints' numbering reverts back to
*SAVED00*
when you reach the limit you had set using the
WPTS
function at the
old waypoint with this same name will be overwritten. This
wrap-around feature keeps the waypoint list from getting filled with
SAVEDXX*
* waypoints. If the old waypoint was in the trip or in a
route, its coordinates will be kept there as an unnamed waypoint. To
choose how many *
they're automatically recycled, press the
SETUP MENU
the
To create a new route from existing waypoints:
1. At the ROUTES screen, press the NEW ROUTE key.
The CREATE A NEW ROUTE dialog box appears.
NOTE:
named sequentially,
DISPLAY SETUP
SAVEDXX*
waypoints are retained before
screen, then press the
Create new route dialog box
Chapter 8 - Creating Routes
*SAVED01*
such as
SAVED
designates a saved
screen. At this limit, the
STAR
key until you reach
DISPLAY SETUP
Page 8-13
,
SAVE
key.