NorthStar 961 Reference Manual page 113

961/962 Operations and Reference Manual, Rev. A
Going directly to the cursor position
To go directly to the cursor's position:
1. Press the CURSOR PAD to move the cursor to the desired
location on the CHART screen, then press the CURSOR
menu key.
The SELECTED CURSOR POSITION dialog box
appears.
2. If desired, you can use the KEYPAD to change the
cursor's coordinates; if not, press the GO NOW key (or
press the CANCEL key to cancel).
A new, temporary waypoint is created called COORD,
which isn't stored in the waypoint database; instead, it's
placed into the trip, where it replaces any future trip
points. Your present vessel position and time are now a
past trip point. The CHART screen is displayed, showing
the course line to the new COORD waypoint.
Chapter 4 - Understanding the Chart Screen
Selected cursor position dialog box
Page 4-21