NorthStar 961 Reference Manual page 41

961/962 Operations and Reference Manual, Rev. A
You can also choose to add those new coordinates to the end of
your trip, or to the end or start of a stored route. For details about
these options, see "Using the cursor on the chart screen" starting on
page 4-17.
Option 2 — Entering coordinates
Your second option for navigating to a point is to enter
numeric coordinates as lat/lon, Loran-C TDs, or distance and
bearing, as follows:
1. From the CHART screen, press the GO TO key.
The GO TO COORDINATES dialog box appears. The
coordinates of your active waypoint, if any, or else the
coordinates of your most recent position, are displayed.
Chapter 1 - Quick Start
Chart screen with COORD waypoint
NOTE:
Page 1-27