NorthStar 961 Reference Manual page 244

Chapter 11 - Using the Trip Function
Joining a future leg
Going directly to a
past waypoint and
continuing
Page 11-10
To join a future trip leg:
1. At the TRIP screen, select the future waypoint at the end
of the leg you want to join.
2. Press the GO TO SELECTION key.
3. Press the JOIN LEG key (or press the CANCEL key to
cancel).
The STEER screen appears, and you're travelling along
the leg to your active waypoint. The intermediate points
have been removed from the trip, but your desired track is
the previously defined leg.
To go to a past waypoint, then follow all points from that point
back to the beginning of the trip:
1. At the TRIP screen, select the desired past waypoint.
2. Press the GO TO SELECTION key.
961/962 Operations and Reference Manual, Rev. A
Go to selection dialog box