NorthStar 961 Reference Manual page 295

Enabling/disabling
individual waypoint
symbols
961/962 Operations and Reference Manual, Rev. A
• chart orientation
• track predictor line
the display of loran data on the INFO BARs
•
• range rings
• distance scale bar
• past trip legs
• chart update regions
Each of these options is described in detail below.
If you're viewing and editing information on the
screen, and you press one of the five function keys to view other
data, your edit-in-progress is immediately cancelled so that you can
view the data requested by your function keypress. To resume
CHART SETUP
editing at the
screen and re-enter the data that you lost when you pressed the
function key. To purposely cancel an edit-in-progress, you'd usually
CANCEL
press the
You can enable or disable the display of waypoint symbols on
the CHART screen. After you enable certain waypoint symbols,
you must ensure that the display of waypoint symbols is
turned on at the WAYPT DISPLAY field (see "Displaying
waypoint symbols and names" starting on page 13-26).
To enable or disable individual waypoint symbols:
1. At the CHART SETUP screen, press the WAYPTS key.
The CHART SETUP screen (for waypoints) appears.
Chapter 13 - Customizing Setup Functions
NOTE:
screen, you must return to that
key.
CHART SETUP
Page 13-25