Displaying Routes; Table 6: Displaying Routes - NorthStar 961 Reference Manual

Displaying routes

Graphical display
961/962 Operations and Reference Manual, Rev. A
Routes may be displayed in two different ways. For the type of
display and its corresponding location, see "Table 6: Displaying
routes" below.
Display type
Graphical
Listing
Displaying a route on the chart screen
A route is displayed on the CHART screen as a dark blue line
that connects waypoints. You can only display one route at a
time on the CHART screen. For example, assume ROUTE A is
already displayed on the CHART screen: If you start creating
ROUTE B on the CHART screen, the display of ROUTE A is
automatically removed.
To display a route on the CHART screen, you must first mark
the route for display:
1. Press the WAYPTS/ROUTES key to access the ROUTES
screen.
2. Press the CURSOR PAD up or down to select the desired
route.
3. To mark the route for display, press the ON CHART key (to
unmark the route for display, press the OFF CHART key).
4. Press the CHART key.

Table 6: Displaying routes

Display location
CHART
on the screen showing a dark blue line
connecting all of the route's waypoints.
ROUTES
on the screen, which lists routes
sorted by whether the route is marked for display
CHART
on the screen, whether the route is
SAVE
marked to accept
name, date the route was last modified, total
distance covered by the route (length), and by
distance to your present position (proximity).
Chapter 8 - Creating Routes
keypresses, route
Page 8-3