NorthStar 961 Reference Manual page 316

Chapter 13 - Customizing Setup Functions
Page 13-46
version, overwrite the existing version, or never replace
the existing version:
>
To ensure that the most recent charts are loaded, press
the NEWEST VERSION key.
To always replace installed charts, press the ALWAYS
>
OVERWRITE key.
To never replace existing charts, press the NEVER
>
OVERWRITE key.
The LOADING CHARTS dialog box is displayed, then the
INSERT HCRF CD dialog box, which prompts you to
insert the appropriate Chart CD into the drive, if
necessary.
7. Remove the Update CD from the drive (keeping this CD
nearby since you'll need it again), and insert the Chart
CD.
8. Press the OK key.
The charts are loaded. At the INSERT HCRF CD dialog
box, you are then prompted to insert the same Update CD
back into the drive.
9. Remove the Chart CD from the drive and insert the same
Update CD.
10. Press the OK key.
The charts are updated. The LOADING CHARTS dialog
box is displayed, followed by the HCRF SUMMARY dialog
box. Each chart loaded is represented by a different
horizontal line, with loading details for the highlighted line
displayed at the bottom (press the CURSOR PAD up or
down to highlight each individual chart). The far-left
column displays either the word OK, or an error number, if
any. If an error number is displayed, write this number
down and see "Table 12: HCRF chart errors" on page
13-55.
961/962 Operations and Reference Manual, Rev. A