Figure 5: Restarting The Desired Track - NorthStar 961 Reference Manual

Chapter 10 - Waypoint and Route Navigation
Restarting from the
steering screens
Restarting from the
chart screen
Restarting from the
trip screen
Page 10-20

Figure 5: Restarting the desired track

Whenever you want to steer directly from an off-course
position to a waypoint, press the RESTART HERE key, and the
desired track will be recalculated to extend from your present
position directly to the next waypoint, resetting your XTE to
zero. You can restart the desired track at the 3-D STEER
screen, the traditional STEER screen, the CHART screen, and
the TRIP screen.
At the 3-D STEER screen or the traditional STEER screen,
press the RESTART HERE key, then press the CONFIRM key.
Your present position becomes your new "from" point; XTE
becomes zero, and the STEER screen appears.
At the CHART screen, first press the GO TO key. At the GO TO
COORDINATES dialog box, press the RESTART HERE key.
Your present position becomes your new "from" point; XTE
becomes zero, and the CHART screen appears.
At the TRIP screen, highlight the active trip waypoint. Press
the GO TO SELECTION key, then press the YES, RESTART
HERE key. A point at your present position is inserted into the
trip. Your present position becomes your new "from" point,
XTE becomes zero, and the STEER screen appears.
961/962 Operations and Reference Manual, Rev. A