NorthStar 961 Reference Manual page 110

Chapter 4 - Understanding the Chart Screen
Selecting objects on
the chart
Page 4-18
When you're moving the cursor to view other areas on the
chart, the 961/962 doesn't automatically display new charts as
it does when your vessel naturally approaches the edge of a
chart. To see a new chart while using the cursor, you must
press the NEW CHART key. To choose a different chart, press
and hold the NEW CHART key to display the
CURSOR-POSITION CHARTS screen, and select the desired
chart (see "Selecting new charts" starting on page 4-8).
To move the cursor a long distance on the chart, it's often
quicker to zoom out, move the cursor, and then zoom in.
Once you've pressed the CURSOR PAD, you can now select
objects on the CHART screen, or else use the CURSOR key to
perform a variety of tasks.
If you move the cursor directly onto an object that you've
stored (for example, a displayed waypoint, route leg, tide
station, or trip), you are automatically selecting that object.
Chart screen with cursor info bar
961/962 Operations and Reference Manual, Rev. A