Chapter 11 - Using the Trip Function
Adding and going
directly to a new
waypoint
Page 11-6
•
join a leg to a future waypoint (skipping over and
removing intermediate points)
•
follow the trip back home by copying old trip points—in
reverse order—to the future part of the trip
You can also restart the leg to the active waypoint at the TRIP
screen, but this action doesn't actually change the trip; for
details, see "Restarting the track at the trip screen" starting on
page 11-14.
You can perform most of the functions listed above at the
screen, since the trip is automatically displayed on that same
screen. However, those functions aren't described here; for details
about modifying your trip on the
cursor key" starting on page 4-20.
To add a new waypoint and go directly to it (this deletes any
active and future points):
1. At the TRIP screen press the GO TO NEW COORDS key.
You don't have to select any particular waypoint,
although the resulting dialog box will be titled as to
which point you've chosen—past, active, or future.
NOTE:
CHART
961/962 Operations and Reference Manual, Rev. A
CHART
screen, see "Using the