Navigating From The Waypoints Screen - NorthStar 961 Reference Manual

Navigating from the waypoints screen

Going to a selected
waypoint now
961/962 Operations and Reference Manual, Rev. A
3. Press the ADD TO END OF TRIP key.
A new waypoint named COORD is created and added to
the end of your trip, and the CHART screen appears. If
you were already past the end of the trip, you'll
immediately begin navigating along the leg to the new
waypoint.
Instead of selecting a waypoint at the CHART screen, you may
prefer to select one from a list of existing waypoints displayed
on the WAYPOINTS screen. After you select a waypoint, you
can go to it now or add it to the end of your trip.
1. Press the WAYPTS/ROUTES key to access the
WAYPOINTS screen.
Because the waypoints you navigate to are usually
nearby, the DISTANCE column is automatically
highlighted, which sorts the entire list by distance from
your position—with the closest waypoints at the top of the
list.
Chapter 10 - Waypoint and Route Navigation
Selected cursor position dialog box
Page 10-17