Chapter 13 - Customizing Setup Functions
Displaying
waypoint symbols
and names
Page 13-26
2. Press the CURSOR PAD to highlight any of the WAYPTS
TO DISPLAY lines, then press the EDIT key.
3. Press the CURSOR PAD left or right or press the LEFT
ARROW or RIGHT ARROW keys to highlight the desired
waypoint(s).
For each highlighted waypoint, to turn the waypoint on or
off, press the ON/OFF key. To turn all waypoint symbols
on or off, press the ALL/NONE key. To use the default
waypoint symbols, press the DEFAULTS ON key.
4. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
5. Press RETURN twice to go back to the SETUP MENU
screen.
After enabling either individual or all waypoint symbols, you
must ensure that the WAYPT DISPLAY field is set to ON,
Otherwise, none of the enabled waypoint symbols will be
displayed on the CHART screen. Here, you can turn on or off
the display of all waypoint symbols on the CHART screen.
Also, you can turn on or off the display of waypoint names on
Chart setup screen (waypoints)
961/962 Operations and Reference Manual, Rev. A