Chapter 4 - Understanding the Chart Screen
Page 4-22
Adding the cursor position to the end of your trip
To add the cursor position to the end of your trip:
1. Press the CURSOR PAD to move the cursor to the desired
location on the CHART screen, then press the CURSOR
menu key.
The SELECTED CURSOR POSITION dialog box
appears.
2. If desired, use the KEYPAD to change the coordinates; if
not, press the ADD TO END OF TRIP key (or press the
CANCEL key to cancel).
A waypoint called COORD is added to the end of the trip,
and the CHART screen is displayed. The future trip leg is
displayed in light blue on the CHART screen. Nothing is
erased from the trip. If you were already past the end of
your trip, you'll immediately begin navigating to this new
position as the active waypoint.
Making a new waypoint
To store a new, named waypoint at the chart location
designated by the cursor:
1. Press the CURSOR PAD to move the cursor to the desired
location on the CHART screen, then press the CURSOR
menu key.
The SELECTED CURSOR POSITION dialog box
appears.
2. If desired, use the KEYPAD to change the coordinates;
next, press the STORE AS WAYPT/ROUTE key.
The STORE AS A WAYPOINT dialog box appears,
supplying a default waypoint name.
961/962 Operations and Reference Manual, Rev. A