Saving the trip as a route
961/962 Operations and Reference Manual, Rev. A
3. Press the GO BACKWARDS key (or press the CANCEL
key to cancel).
The STEER screen appears. Any active and future points
are removed, and navigation begins directly from your
present position to the selected waypoint. All the earlier
trip points are added in reverse order to the future trip.
If, at any time, you decide to save the sequence of waypoints
in the trip, you can save and store your entire current trip as a
route. Before saving the trip, however, you may want to erase
unwanted waypoints from it; see "Erasing the trip" starting on
page 11-12.
1. At the TRIP screen, press the SAVE TRIP AS ROUTE key.
The SAVE THE TRIP AS A ROUTE dialog box appears.
Chapter 11 - Using the Trip Function
Past trip point dialog box
Page 11-11