NorthStar 961 Reference Manual page 243

Going directly to a
future waypoint
and continuing
961/962 Operations and Reference Manual, Rev. A
3. Press the ADD TO END OF TRIP key (or press the
CANCEL key to cancel).
The TRIP screen appears and shows COORD as the new
waypoint added to the end of the trip. If the trip had an
active waypoint, current navigation isn't affected. If the trip
didn't have an active waypoint, you'll begin navigating to
this new waypoint, and the STEER screen appears.
To go directly to a future waypoint:
1. At the TRIP screen, select the desired future waypoint.
2. Press the GO TO SELECTION key.
3. Press the GO DIRECT key (or press the CANCEL key to
cancel).
The STEER screen appears. Your desired track is from
your present location to your chosen one. Intermediate
waypoints, if any, are removed from the trip.
Chapter 11 - Using the Trip Function
Go to selection dialog box
Page 11-9