NorthStar 961 Reference Manual page 242

Chapter 11 - Using the Trip Function
Adding a new
waypoint to the end
of the trip
Page 11-8
3. Use the KEYPAD to enter your desired new destination as
lat/lon, TDs, or distance and bearing.
4. Press the INSERT key (or press the CANCEL key to
cancel).
If you changed the active waypoint, the STEER screen
appears, showing COORD as the new active waypoint. If
you selected a future waypoint, the TRIP screen appears.
In either case, the TRIP screen displays the new COORD
waypoint.
To add a new waypoint to the end of your trip:
1. At the TRIP screen, press the GO TO NEW COORDS key.
You don't have to select any particular waypoint, since the
waypoint will be added to the end (the resulting dialog
box will be titled as to which point you've chosen).
2. Use the KEYPAD to enter your desired new destination as
lat/lon, TDs, or distance and bearing.
961/962 Operations and Reference Manual, Rev. A
Future trip point dialog box