NorthStar 961 Reference Manual page 157

961/962 Operations and Reference Manual, Rev. A
• update a waypoint's coordinates to be the same as your
vessel's position.
To move a waypoint to another location:
1. At the CHART screen, press the CURSOR PAD and if
necessary, the LEFT ARROW and RIGHT ARROW keys, to
select a named waypoint, then press the CURSOR menu
key.
2. Press the EDIT key.
The CHART screen appears, showing the selected
waypoint.
3. Press the CURSOR PAD to move the cursor and the
waypoint to the desired location.
4. Press the DONE key to store the waypoint coordinates to
the waypoint database (or press the CANCEL key to
cancel).
5. If this waypoint is used in the trip or one or more routes,
you'll always be asked if you want to keep the original
coordinates as unnamed points in the trip or routes (if so,
press the KEEP OLD COORDS key), or use the new
coordinates instead (press the USE NEW COORDS key).
The CHART screen appears, showing the new location of
the waypoint and its position data in the CURSOR INFO
BAR.
To update a waypoint's coordinates to be the same as your
vessel's position:
1. At the CHART screen, press the CURSOR PAD to select an
existing waypoint, then press the CURSOR menu key.
2. At the SELECTED WAYPOINT dialog box, press the EDIT
key.
3. When your vessel is at the position where you want the
selected waypoint to be, press the UPDATE key.
4. If the selected waypoint is used in one or more routes or
the trip, you'll be asked if you want to keep the original
coordinates as unnamed points in the route or trip (if so,
Chapter 6 - Creating Waypoints
Page 6-15