961/962 Operations and Reference Manual, Rev. A
To go directly to a past, current, or future trip point.
1. On the CHART screen, press the CURSOR PAD to select
the desired point, then press the CURSOR menu key.
The SELECTED TRIP POINT dialog box appears. (If you
chose a past trip point, this dialog box is named
SELECTED COORDINATE.)
2. To go directly from your present position to this point,
press the GO NOW key (or press the CANCEL key to
cancel).
The CHART screen appears, showing a track line to the
selected point.
Chapter 4 - Understanding the Chart Screen
Selected trip point dialog box
Page 4-29