NorthStar 961 Reference Manual page 123

961/962 Operations and Reference Manual, Rev. A
3. If desired, to reverse the direction of the route, press the
REVERSE DIRECTION key; if not, check in the dialog box
that you're adding the desired point or leg to the end of
the trip, then press the ADD TO END OF TRIP key (or
press the CANCEL key to cancel).
The CHART screen appears, showing the route added to
your trip. If you were already past the end of the existing
trip, you'll immediately begin navigating to the new route.
Joining a route leg or trip leg
You can join a leg of a displayed route, or join a future leg of
the trip.
To join a future trip leg:
1. On the CHART screen, press the CURSOR PAD to select
the desired future trip leg (displayed in light blue).
2. Press the CURSOR menu key.
The SELECTED TRIP LEG dialog box appears.
Chapter 4 - Understanding the Chart Screen
Selected route point dialog box
Page 4-31