NorthStar 961 Reference Manual page 152

Chapter 6 - Creating Waypoints
Page 6-10
4. Use the KEYPAD to enter the new waypoint's name (or
use the default name, W0000, which automatically names
these waypoints sequentially from W0001 up to W9999).
You can use any characters on the KEYPAD. The name
can be from one to nine characters long, and must be
unique. To select a symbol for this waypoint, after you've
finished storing its coordinates here on the CHART
screen, go to the WAYPOINTS screen and edit the
waypoint.
5. Press the MAKE NEW WAYPOINT key (or press the
RETURN key to cancel).
The new waypoint is stored and the CURSOR INFO BAR
appears, showing the navigation information about this
new waypoint.
To return to your vessel's position, press the VESSEL
key.
961/962 Operations and Reference Manual, Rev. A
Store as a waypoint dialog box