Erasing The Trip - NorthStar 961 Reference Manual

Chapter 11 - Using the Trip Function

Erasing the trip

Page 11-12
2. If desired, use the KEYPAD to change the default route
name in the NAME field.
3. Press the SAVE AS A ROUTE key (or press CANCEL to
cancel).
The TRIP screen appears. Current navigation, if any, isn't
affected.
At the TRIP screen, you have the following options for erasing
your trip:
• erasing the entire trip
• erasing all the points up to or after a selected one
• erasing a single point
It is recommended that you erase an old trip before you start a
new one.
To access the ERASURES dialog box, at the TRIP screen press
the ERASURES key.
Save trip as route dialog box
961/962 Operations and Reference Manual, Rev. A