Editing A Track - NorthStar 961 Reference Manual

Chapter 9 - Creating Tracks

Editing a track

Editing a track at
the tracks screen
Page 9-10
2. To stop saving data to this track, press the STOP SAVING
key (turning off the system will also stop saving).
The END field is filled in with the present date and time.
The final length of the track is displayed in user-selected
units at the bottom of the screen.
3. To set the desired color, press the NEXT COLOR key to
cycle through a selection of eight different colors.
4. To mark the track for display on the CHART screen, press
the ON CHART key.
Track data is updated on the CHART screen every 10
seconds.
You can change an existing track at the TRACKS screen.
At the EDIT TRACK screen, you can change a track in the
following ways:
• change its name
• change its color
• change its description
You can't change the start or end date and time of a track that
has already been defined and saved.
To change a stored track's name, color, or description:
1. At the TRACKS screen, press the CURSOR PAD up or
down to select the desired track, then press the EDIT key.
The cursor goes to the NAME field.
961/962 Operations and Reference Manual, Rev. A