Optional Document Finisher - Kyocera TASKalfa 300i Operation Manual

Optional Document Finisher

If a misfeed occurs in the optional document finisher, refer to the respective Operation Guides to clear the jam.
3
Remove any paper.
If the original tears, remove every loose scrap from
inside the machine.
4
Lift up reverse unit.
5
Remove the paper.
If the original tears, remove every loose scrap from
inside the machine.
6
Remove the original by turning the dial C as shown
in the figure.
C
7
Put reverse unit back in its original place and close
the document processor top cover.
8
Reload the originals on the document processor
tray.
10-26
Troubleshooting