Misfeed In The Optional Document Processor - Kyocera KM-C4008 Operation Manual

Section 9 TROUBLESHOOTING
3
Open the reversing section cover (shown as (2) in the
illustration) and remove the jammed paper without tearing
it.
(2)
NOTE
If the paper does happen to tear, remove any loose scraps
from inside the copier.
4
Close all open covers and replace the Duplex Unit in its
original position in the copier.
9-16

Misfeed in the optional Document Processor

If the following display appears, an original has misfed in the
Document Processor. In this case, the original set indicator will
blink red. Perform the following procedure to remove the jammed
original.
Inch specifications
aper misfeed.
JAM
Metric specifications
aper misfeed.
JAM
1
Remove all of the originals remaining in the original table.
2
Remove all of the originals that have been ejected onto the
original eject.
1.Open document processor cover.
2.Lift up reversing unit.
3.Turn dial to left.
4.Remove original paper.
5.Close document processor cover.
1.Open cover of document processor.
2.Lift reversing unit up.
3.Turn left dial.
4.Remove original paper.
5.Close cover of document processor.