Step 3: Verifying Camera Operation; Step 4: Verifying The Connection Between The Camera And Pc - IAI GOX-2402M-USB User Manual

Go-X Series USB3 Vision I/F

Step 3: Verifying Camera Operation

When power is supplied to the camera while the necessary equipment is connected, the
POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera
starts.When initialization is complete, the POWER/TRIG LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED.
When properly turned on
Lit green
* For details on how to read the LEDs, see "LED status and camera status" in the "Parts
Identification" section.
Step 4:
Verifying the Connection between the Camera and PC
Verify whether the camera is properly recognized via Control Tool.
Connecting the Camera to Control Tool
1
Startup eBUS Player for JAI
eBUS Player for JAI
eBUS Player for JAI startup screen appears.
— 15 —