Switching The Instrument On And Off - TESTO 300 LL NEXT LEVEL Instruction Manual

7 First steps

Switching the instrument on and off

7.5
Current
Action
status
Instrument Press the button for
off a long time (> 3 s)
When the measuring instrument is started for the first time, the setup
wizard guides you through the following setting parameters step by
step:
- Country version
- Language
- WLAN
- Date and Time
- Own company address
- E-mail account
A tutorial can be started after the setup wizard.
The tutorial demonstrates the general operation and the most important
functions of the measuring instrument using examples.
Instrument Press the button
on briefly (< 1 s)
Instrument Press the button for
on a long time (>1 s)
Standby mode has 3 time-dependent functions:
Standby time up to 1 min: Immediate restart after pressing the key.
•
Standby time up to 1 hour: After pressing the key, a restart takes
•
place after 5 seconds.
• Standby time more than 1 hour: testo 300 NEXT LEVEL is in power
save mode. After pressing the key, a restart takes place after the
zeroing phase.
Unsaved readings are lost when the measuring instrument is switched
off.
18
Function
Instrument is switched on.
Instrument is switched to standby mode.
The instrument is re-activated when the
button is pressed again.
Selection: [OK] Instrument is switched
off or cancel the instrument being
switched off with [Cancel].