Smart Probes Compatible With The Instrument; Establishing A Connection With The Testo Smart App; Clean The Measuring Instrument - TESTO 300 NEXT LEVEL Short Instructions

Smart Probes compatible with the
7.6.2
instrument
Order number
0560 2115 02
0560 1510
0563 3915
Establishing a connection with the testo
7.6.3
Smart App
To establish a connection via Bluetooth
smartphone with the testo Smart App installed on it.
You can get the App for iOS instruments in the App Store or for Android
instruments in the Play Store.
Compatibility:
Requires iOS 12.0 or later/Android 6.0 or later,
requires Bluetooth
Once the connection between the app and the testo 300 NEXT LEVEL has been
successfully established, the app is in second screen mode. This is indicated by
a yellow frame in the app.
This means that all measurement data from the testo 300 NEXT LEVEL is being
mirrored on the app. The measurement can now be controlled from both
instruments.
It is possible to carry out the following actions:
Start measurement
•
Stop measurement
•
Save measurement from app to instrument
•
After the measurement, create a quick report on the app for further
•
documentation on the smartphone

Clean the measuring instrument

7.7
> If the housing of the measuring instrument is dirty, clean it with a damp
cloth.
Use distilled water, or alternatively mild solvents, to clean the flue gas
analyzer.
Designation
testo 115i - clamp thermometer with smartphone
operation
testo 510i - differential pressure measuring instrument
with smartphone operation
testo 915i - temperature probe with smartphone
operation
® 4.0.
7 Using the product
® , you need a tablet or
19