Working From The Ametek 3050 Uhp Configurator Software; Uhp Configurator Software Installation - Ametek 3050-RM User Manual

Working From the AMETEK 3050 UHP Configurator Software

The Configurator Software provides a graphical user interface to set up param-
eters for either a single analyzer or multiple analyzers.

UHP Configurator Software Installation

1. Insert the Configurator Software CD into CD ROM drive.
2. The installation program should begin to run immediately. If it does not
3. Follow the instructions on the subsequent screens to complete the instal-
PN 305892901, Rev S
Although you can set and view parameters for multiple analyzers
using the 3050 Configurator Software, you can only work with one
analyzer at any time.
start automatically, click RUN... from the Windows Start menu. Type the
drive letter, followed by a colon ( : ) and a backslash ( \ ) and the word
"setup.exe" (d:\setup.exe) and click OK to start the installation program.
lation. When you get to the Setup Complete screen, click Finish to com-
plete the installation. The default location for the 3050-RM UHP software is
in the AMETEK, Inc. folder.
Turn off all power saving modes.
|
Controller/Interface 3-15