Controller/Interface; Ametek 3050 Configurator Software; Installing The Configurator Software - Ametek 3050-OLV User Manual

Moisture analyzer

Hide thumbs Also See for 3050-OLV:

Table of Contents

The 3050 Configurator Software provides a graphical user interface to set up

parameters for either a single analyzer or multiple analyzers.

1. Insert the Configurator Software CD into the PC's CD ROM drive.

2. The installation program should begin to run immediately. If it does not start

3. Follow the instructions on the subsequent screens to complete the in-

PN 305200901, Rev YT

Controller/Interface

Although you can set and view parameters for multiple analyzers

using the 3050 Configurator Software, you can only work with one

analyzer at any time.

automatically, click RUN from the Windows Start menu. Type the appropri-

ate drive letter, followed by a colon ( : ) and a backslash ( \ ) and the word

"setup.exe" (for example, d:\setup.exe) and click OK to start the installation

program.

stallation. When you get to the Setup Complete screen, click Finish to

complete the installation. The default location for the 3050 Configurator

Software is in the AMETEK folder.

Controller/Interface

3-1

Table of Contents