AMETEK UHP Moisture Confi gurator Software
The Configurator software provides a graphical user interface to set up
parameters for either a single analyzer or multiple analyzers.
NOTE
Confi gurator Software Installation
1.
Insert the configurator software CD into CD ROM drive.
2.
The installation program should begin to run immediately. If it does
not start automatically, click RUN... from the Windows Start menu.
Type the drive letter, followed by a colon ( : ) and a backslash (\) and the
word "setup.exe" (d:\setup.exe) and click OK to start the installation
program.
3.
Follow the instructions on the subsequent screens to complete the in-
stallation. When you get to the Setup Complete screen, click Finish to
complete the installation. The default location for the 5830 software is
in the AMETEK, Inc. folder.
NOTE
PC INTERFACE
Though you can set and view parameters for multiple analyzers using
the Configurator software, you can only work with one analyzer at any
time.
Turn off all power saving modes.
PC Interface | A-1