5�1�2�- Maximum Demand - Circutor CVM-C11 Instruction Manual

CVM-C11
To see the minimum values of the screen being displayed, press the
displayed for 30 seconds. The
The maximum and minimum values are reset on the programming menu. (
).
AND MINIMUM VALUES"
5�1�2�- MAXIMUM DEMAND
The device calculates the maximum demand of the following:
 Current L1, L2 y L3.
 The three-phase current.
 Three-Phase Active Power.
 Three-Phase Apparent Power.
 Three-Phase Inductive Reactive Power
 Three-Phase Capacitive Reactive Power
This value can be displayed on the display screen of the parameter by pressing the
keys at the same time.
The symbol appears on the display (
Figure 37: Analyzer profile screen displaying the maximum demand values�
Press keys or
The maximum demand is programmed in the configuration menu from parameters "
INTEGRATION OF THE MAXIMUM DEMAND"
The maximum demand values are reset on the programming menu:
MAND".
Instruction Manual
Figure 36: Analyzer profile screen displaying the maximum values�
symbol will be displayed.
Figure 37
to stop displaying the maximum demand values.
y
"6.11.- MAXIMUM DEMAND INTEGRATION PERIOD".
key for 3 seconds. These are
"6.17.- DELETING MAXIMUM
).
"6.12. DELETING MAXIMUM DE-
and
6.10.- TYPE OF
51