6�14�2�- Selecting The Screens - Circutor CVM-C11 Instruction Manual

CVM-C11
Press key for 3 seconds to edit the value. The
The key jumps between the possible options.
To validate the data, press
Configuration values
Table 36:Configuration values: Selecting the screens that will be displayed�
Yes, the display screens are those that were stored in previous programming
settings of the device. (In the case of new devices, these will be the same as those
Possible values
of the analyzer profile)
No, the display screens are selected.
Press key to access the next programming step.
6�14�2�- SELECTING THE SCREENS
Note: The following screen is displayed if you have selected the
in, "
6.14.1.- SELECTING THE SCREENS THAT WILL BE DISPLAYED
This screen displays the first screen of the analyzer profile, Phase-phase Voltage and the user profile
viewing option can be selected.
Press key for 3 seconds to edit the value. The
The key jumps between the possible options.
To validate the data, press
Instruction Manual
for 3 seconds and the
Selecting the screens that will be displayed
for 3 seconds and the
icon appears at the top of the screen.
icon will disappear from the display.
profile. And No has been selected
USEr
".
icon appears at the top of the screen.
icon will disappear from the display.
67