5�3�- User Profile - Circutor CVM-C11 Instruction Manual

Symbols T1, T2 and T3 on the display indicate the three tariffs available on the device.
The selected tariff is indicated at the bottom right of the display.
5�3�- USER PROFILE
This profile is identified with the
This profile displays the screens selected in the programming menu (
).
PROFILE"
Note: If you have not selected the display of any screen, the device will restart and display the
Phase-Neutral Voltage screen by default.
The voltage and current harmonics are also displayed, up to the 31st order harmonic, for each of the
lines, L1, L2 and L3 ("
54
CO Emissions Tariff 1
2
CO Emissions Tariff 2
2
CO Emissions Tariff 3
2
Total CO
Consumption and generation values
No� of hours Tariff 1
No� of hours Tariff 2
No� of hours Tariff 3
Total No� of hours, ∑
symbol at the top of the screen (
Figure 38: Screen of the CVM-C11 with the user profile�
.").
5.4.- HARMONICS
Emissions, ∑
2
"6.14.- SELECTING THE OPERATION
CVM-C11
).
Figure 38
Instruction Manual