6�31�- Rs-485 Communications: Protocol - Circutor CVM-C11 Instruction Manual

Configuration values
Press key
6�31�- RS-485 COMMUNICATIONS: PROTOCOL
The RS-485 communications protocol is selected on this screen.
Press key
The key
To validate the data, press
Configuration values
Not available for model CVM-C11-ITF-IN-ETH-ICT2�
(8)
Note: The device will restart after exiting the setup menu if the RS-485 communications parameters
have been modified.
Press key
86
Table 60:Configuration values: Operating mode of digital input 2�
Operatinf mode of digital input 2
Possible values
to access the next programming step.
for 3 seconds to edit the value. The
jumps between the possible options.
for 3 seconds and the
Table 61:Configuration values: RS-485: Protocol�
Possible values
to access the next programming step.
LoGic Logic input
tAriFF Tariff selection.
icon appears at the top of the screen.
icon will disappear from the display.
RS-485: Protocol
Modbus
BACnet
(8)
CVM-C11
Instruction Manual