Table of Contents
Advertisement
CVM-C11
7�2�- MODBUS TCP PROTOCOL: DHCP
Note: Screen visible if the Modbus TCP protocol has been programmed,
On this screen you select whether or not to enable DHCP. If DHCP enable is selected (default setting),
the IP address is assigned dynamically through a central server and no further parameters need to
be configured.
Press key
for 3 seconds to edit the value. The
The key
jumps between the possible options.
To validate the data, press
Configuration values
Press key
to access the next programming step.
7�3�- MODBUS TCP PROTOCOL: IP ADRESS
Note: Screen visible if the Modbus TCP protocol has been programmed,
This screen configures (DHCP not enabled) or displays the IP address.
Press the
key to display the value.
Instruction Manual
for 3 seconds and the
Table 72:Configuration values: Modbus TCP, DHCP�
Modbus TCP: DHCP
Yes, DHCP enabled
Possible values
no, DHCP not enabled
"7.1.- PROTOCOL".
icon appears at the top of the screen.
icon will disappear from the display.
"7.1.- PROTOCOL".
95
Advertisement
Table of Contents
Need help?
Do you have a question about the CVM-C11 and is the answer not in the manual?
Questions and answers