6�25�7�- Contact Status; 6�26�- Programming The Alarm Relay 2 - Circutor CVM-C11 Instruction Manual

CVM-C11
Configuration values
Press key to access the next programming step.
6�25�7�- CONTACT STATUS
The status of relay contacts is selected on this screen.
Press key for 3 seconds to edit the value. The
The key jumps between the possible options.
To validate the data, press
Configuration values
Press key to access the next programming step.
6�26�- PROGRAMMING THE ALARM RELAY 2
In this step, all the values corresponding to alarm relay 2 are programmed.
They are programmed as in the case of alarm relay 1, see
Instruction Manual
Table 54:Configuration values: Disconnection delay�
Disconnection delay
Minimum value
Maximum value
for 3 seconds and the
Table 55:Configuration values: Contact status�
Contact status
NO Normally open contact.
Possible values
NC Normally closed contact.
0 seconds
9999 seconds
icon appears at the top of the screen.
icon will disappear from the display.
"6.25.- PROGRAMMING THE ALARM RELAY 1".
81