7�7�- Modbus Tcp Protocol: Port; 7�8�- Bacnet Protocol: Port - Circutor CVM-C11 Instruction Manual

7�7�- MODBUS TCP PROTOCOL: PORT
Note: Screen visible if the Modbus TCP protocol has been programmed,
The Ethernet communications port is configured on this screen.
Press key
To enter or modify the value, press the
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values. The
To validate the data, press
Press key
7�8�- BACNET PROTOCOL: PORT
Note: Screen visible if the BAcnet protocol has been programmed,
The Ethernet communications port is configured on this screen.
Press key
To enter or modify the value, press the
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values. The
To validate the data, press
Press key
98
for 3 seconds to edit the value. The
key jumps to the previous digit.
for 3 seconds and the
to access the next programming step.
for 3 seconds to edit the value. The
key jumps to the previous digit.
for 3 seconds and the
to access the next programming step.
icon appears at the top of the screen.
key repeatedly, increasing the value of the flashing digit.
icon will disappear from the display.
"7.1.- PROTOCOL".
icon appears at the top of the screen.
key repeatedly, increasing the value of the flashing digit.
icon will disappear from the display.
CVM-C11
"7.1.- PROTOCOL".
Instruction Manual
to
to