Circutor CVM-C11 Instruction Manual page 119

CVM-C11
Electrical equipment for measurement, control and laboratory use - EMC require-
ments - Part 1: General requirements
Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement tech-
niques - Electrostatic discharge immunity test
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques
- Radiated, radio-frequency, electromagnetic field immunity test
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques
- Electrical fast transient/burst immunity test
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement tech-
niques - Surge immunity test
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques
- Immunity to conducted disturbances, induced by radio-frequency fields
Electromagnetic compatibility (EMC) -- Part 4-8: Testing and measurement tech-
niques - Power frequency magnetic field immunity test
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques
- Voltage dips, short interruptions and voltage variations immunity tests
Safety requirements for electrical equipment for measurement, control and laborato-
ry use -- Part 2-030: Particular requirements for testing and measuring circuits
Safety requirements for electrical equipment for measurement, control and laborato-
ry use -- Part 1: General requirements
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V
DC - Equipment for testing, measuring or monitoring of protective measures - Part 12:
Power metering and monitoring devices (PMD)
Instruction Manual
Standards
96
Figure 41: Dimensions of the CVM-C11�
EN IEC 61326-1:2021
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
EN 61010-2-030
EN 61010-1
EN IEC 61557-12
67
64
119