7�4�- Modbus Tcp Protocol: Mask - Circutor CVM-C11 Instruction Manual

Press key
To enter or modify the value, press the
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values. The
To validate the data, press
Press key
7�4�- MODBUS TCP PROTOCOL: MASK
Note: Screen visible if the Modbus TCP protocol has been programmed,
On this screen the IP mask is configured (DHCP not enabled) or displayed.
Press the
Press key
To enter or modify the value, press the
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values. The
To validate the data, press
Press key
96
for 3 seconds to edit the value. The
key jumps to the previous digit.
for 3 seconds and the
to access the next programming step.
key to display the value.
for 3 seconds to edit the value. The
key jumps to the previous digit.
for 3 seconds and the
to access the next programming step.
icon appears at the top of the screen.
key repeatedly, increasing the value of the flashing digit.
icon will disappear from the display.
icon appears at the top of the screen.
key repeatedly, increasing the value of the flashing digit.
icon will disappear from the display.
CVM-C11
"7.1.- PROTOCOL".
Instruction Manual
to
to