4�4�5�- Resetting The Maximum Demand; 4�4�6�- Deleting The Maximum Value Of Maximum Demand; 4�4�7�- Deleting Energy Values - Circutor CVM-NET4+-MC Instruction Manual

4�4�5�- RESETTING THE MAXIMUM DEMAND
When the maximum demand is calculated on the static window, its parameter can be reset, allowing
the calculation to be restarted.
Example of a write command. Resetting the maximum demand of Channel 1.
4�4�6�- DELETING THE MAXIMUM VALUE OF MAXIMUM DEMAND
Deleting the maximum value of maximum demand is separate from the deletion of other maximum
and minimum values.
Example of a write command. Deleting the maximum value of the Channel 1 maximum demand.
4�4�7�- DELETING ENERGY VALUES
The device records the three-phase or single phase energy values (depending on the configuration) in
the Modbus/RTU variables table.
A command is available for resetting these records:
Modbus Address
16
Modbus Address
0839
083 A
083B
083C
083D
TX: NP 05 0839 FF00 CRC
RX: NP 08 0839 FF00 CRC
Table 11:Deleting the maximum value of maximum demand
Modbus Address
083F
0840
0841
0842
TX: NP 05 083F FF00 CRC
RX: NP 08 083F FF00 CRC
0834 Deleting Channel 1 Three-phase Energies
0835 Deleting Channel 2 Three-phase Energies
0836 Deleting Channel 3 Three-phase Energies
0837 Deleting Channel 4 Three-phase Energies
0898 Deleting Channel 1-1S1 Single phase Energies
0899 Deleting Channel 1- 2S1 Single phase Energies
089 A Deleting Channel 1- 3S1 Single phase Energies
Table 10:Resetting the maximum demand
Variable
Maximum Demand – Channel 1
Maximum Demand – Channel 2
Maximum Demand – Channel 3
Maximum Demand – Channel 4
Maximum Demand – 1, 2, 3 and 4
Variable
Maximum Demand – Channel 1
Maximum Demand – Channel 2
Maximum Demand – Channel 3
Maximum Demand – Channel 4
Table 12:Deleting energies
Variable
CVM-NET4+-MC
Data margin
FF
FF
FF
FF
FF
Data margin
FF
FF
FF
FF
Data margin
FF
FF
FF
FF
FF
FF
FF
Instruction Manual