6�11�- Maximum Demand Integration Period - Circutor CVM-C11 Instruction Manual

Press key
The key
To validate the data, press
Configuration values
Note: When modifying the type of integration, the device restarts the calculation of the maximum
demand.
Press key
6�11�- MAXIMUM DEMAND INTEGRATION PERIOD
The maximum demand integration period is programmed in minutes on this screen. See
MAXIMUM DEMAND"
Press key
To enter or modify the value, press the
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values.
To validate the data, press
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Configuration values
64
for 3 seconds to edit the value. The
jumps between the possible options.
for 3 seconds and the
Table 31:Configuration values: Type of integration of the maximum demand�
Type of integration of the maximum demand
Possible values
to access the next programming step.
�
for 3 seconds to edit the value. The
for 3 seconds and the
Table 32:Configuration values: Maximum demand integration period�
Maximum demand integration period
Minimum value
Maximum value
icon appears at the top of the screen.
icon will disappear from the display.
SI ide Sliding window
timed Fixed window
icon appears at the top of the screen.
key repeatedly, increasing the value of the flashing digit.
icon will disappear from the display.
0
60
CVM-C11
"4.1.2.-
to
Instruction Manual